Forecourt Equipment
Berrys comprehensive range of forecourt equipment extends from pump stands, offset fill and vent frames, vapour recovery and overfill prevention equipment to pollution control, monitoring wells, manhole covers, signs and labels.
We have also included information and stock code numbers for some of the most common replacement parts and consumables. If there are additional items or equipment that you require, please telephone +44 (0) 121 558 4411 and we will do our best to help.
Pollution Control
Separators
Full retention separators available in 1 to 3 compartment configurations for forecourt applications, car wash, jet wash etc.
Oil Alarm Systems
These are available to meet PPG3 Guidelines. A visual and audible warning is provided by the control unit. A dedicated tube is provided within the separator.
Separators Class 1
Class I & II Enviroceptors for forecourt applications. Designed to comply with European Standard EN858 and Pollution Precaution PPG3, specifically to contain a spillage from a 7600 litre road tanker compartment.
Silt Traps
Available for car wash and jet wash applications.
Hinged heavy duty grill is provided.
Fabrication
The manufacture of mild steel fabrications has complemented our supply to the industry for many years, made to either our own design, or to customers’ specifications.
Stainless Steel Pump Island Surrounds
Manufactured to various specifications
Our services and products include
- Man-lid Modifications
- Steel Tube and Section Fabrications
- Pump Stands
- Vent and Off-set Fill Frames
- Pump Barriers
- Manifolds
- Safety Platforms
- Suction Pipes
- Bush, Plug and Fill Pipe Extractor kit
Adaptor Plates
Retro-fit Chambers to our Man-lid Adaptor Plates
Fibrelite
Composite Covers
Fibrelite tank access covers are designed and manufactured specifically for use on petrol and diesel forecourts to provide easy acess to manholes and to comply with current health and safety demands.
Chamber Systems
Fibrelite has developed a series of chamber systems that can
provide the most
practical and cost effective interface between the storage tank and manhole
cover. This is achieved through a combination of chamber types and sizes together
with variations of extensions, corbels, seals and composite covers.
General Forecourt Equipment
Monitoring Wells
8”, 12” or 18” with optional galvanised or polyethylene skirt. Water tight lid, with buna seal, incorporates cast-in identification triangle.
Vapour Recovery Equipment
Wide range of equipment for use on above or below ground systems.
Pre-fabricated above ground manifolds.
Overfill Valves
We have large stocks of 3” and 4” valves for below ground storage tanks.
Steel Manhole Covers
Comprehensive range available:
- Heavy Duty Black
- Heavy Duty Galvanised
- Light Duty Black
- Light Duty Galvanised
- Wide Flange and Deep Flange available for forecourt applications
- Single Seal or Double Seal
Replacement Parts / Consumables
| STOCK CODE | DESCRIPTION | |
| WELFPA01 WELFPA02 WELFPA03 WELFPA04 WELFPA05 |
2”M x 2”F Fillpipe Adaptor 2.5”M X 2.5”F Fillpipe Adaptor 3”M X 3”F Fillpipe Adaptor 4”M X 4”F Fillpipe Adaptor 3”M X 4”F Fillpipe Adaptor |
 |
| OP33VA03 | 3” X 3” OPW Vapour Adaptor and Cap c/w Padlock |  |
| WEFLAH01 | 3” Flame Arrestor and Housing |  |
| WECAMA03 WECAMA04 WECAMA08 WECAMA01 |
4” Cam Arm Adaptor 3” Part A Cam Arm Adaptor 3” Cam x 4” Female BSP Adaptor 4 x 3” Cam Arm Adaptor |
 |
| WESACP01 WESACP02 WESACP03 WESACP04 |
4” Grey Single Arm Cap c/w padlock KTD 4” Grey Single Arm Cap c/w Padlock KA 4” Grey Single Arm Cap c/w Brass Padlock KTD 3” Grey Single Arm Cap c/w Padlock KTD |
 |
| WEDNFC01 WEDNFC02 WEDNFC03 WEDNFC04 |
2” Dip-n-Fill Cap 2.5” Dip-n-Fill Cap 3” Dip-n-Fill Cap 4” Dip-n-Fill Cap |
 |
| WELOFC01 WELOFC02 WELOFC03 WELOFC04 |
2” Offset Fill Cap 2.5” Offset Fill Cap 3” Offset Fill Cap 4” Offset Fill Cap |
 |
| PAUNIC01 | 4” Uni Cap |  |
| OPPVVV01 OPPVVV02 |
2” OPW Pressure Vacum Vent 523-UK 3” OPW Pressure Vacuum Vent 523-310L |
 |
| 4” Galvd Risers (any size or length) |  |
|
| WECAMA05 WECAMA06 WECAMA07 |
4” Cam Arm Offset Cap 25007 3” Cam Arm Offset Cap 15010 4” Cam Arm Dip-n-Fill Cap 25008 |
 |
| WECOWL01 WECOWL02 |
1.5” x 2” Vent Cowl 25001 3” Vent Cowl 25002 |
 |
| BC3ODC02 | 3” Orange Dust Cap c/w Padlock |  |
| PSSPRI01 PSSPRI02 PSSPRI03 PSSPRI04 |
1” BSP Bronze Apollo Spring Return Ball Valve 1” BSP Bronze Apollo Spring Return Ball Valve Lockable 1” BSP S/STL Apollo Spring Return Ball Valve 1” BSP S/STL Apollo Spring Return Ball Valve Lockable |
 |
| WEPRE02 | 2” Pressure Vacuum Vent (ECO) |  |
| OPAGFV01 | OPW AG Ball Float 320 DVB |  |
| RIPVVA01 RISVEN01 RISVEN02 |
2” Pressure Vacuum Vent Assy Ris-Vent 2 2” Pre/Vac Vent Quick Release Ris-Vent 2 3” Vent Free Quick Release Ris-Vent |
 |
| RISUPV01 RITUPV01 |
Under Pump Valve RIS-UPV Under Pump Valve 2468 RIS-UPV-Test |
 |
| WESPAR28 WESPAR27 WESPAR23 WESPAR24 WESPAR25 WESPAR26 |
4” Cam Arm Offset Cap Seals 3” Cam Arm Offset Cap Seals 4” Cam Arm Adaptor Seals 3” Cam Arm Adaptor Seals 2.5” Cam Arm Adaptor Seals 2” Cam Arm Adaptor Seals |
 |
| WESPAR29 WESPAR30 WESPAR19 WESPAR20 WESPAR21 WESPAR22 |
3” Single Arm Caps ‘O’ Rings High Nitrile 4” Single Arm Caps ‘O’ Rings High Nitrile 2” Fill Pipe Adaptor Leather Seal 2.5” Fillpipe Adaptor Seal 3” Fill Pipe Adaptor Leather Seal 4” Fill Pipe Adaptor Leather Seal |
 |
| PKBRLS01 PKBRLS02 PKABLS02 PKBBSS01 PKBBSS02 WESPAR31 |
Brass Bodied L/S Padlock KA Brass Bodied L/S Padlock KTD Brass Bodied L/S Padlock KTD Brass Bodied S/S Padlock KA Brass Bodied Padlocks S/S KTD Padlock to suit Single Arm Cap KTD |
 |
| HFGILF01 | Flex Connector |  |
| HFMMTF01 HFMMTF02 HFMMTF03 HFMM0601 HFMM1201 |
2” Male-Male Tank Flex 3” Male-Male Tank Flex 4” Male-Male Tank Flex 1 x 6” Plated Male-Male Flex 1” x 12” Plated Male-Male Flex |
 |
| HFUPFF01 HFUPFF02 HFUPFM01 HFUPFM02 |
1.5” x 4” Female UP Flex 1.5” x 6” Female UP Flex 1.5” x 3.5” Male UP Flex 1.5” x 6” Male UP Flex |
 |
| WESUDE01 | 2” x 1.5” Suction Deflect |  |
| BCBLAN01 | Triangular UP Blanking Plate 3mm Thick |  |
| HFMMSB01 HFMMSB02 HFMMSB03 HFMMSB04 HFMMSB06 HFMMSB08 |
1.5” x 12” Male-Male Swivel Braided Flex 1.5” x 15” Male-Male Swivel Braided Flex 1.5” x 18” Male-Male Swivel Braided Flex 1.5” x 24” Male-Male Swivel Braided Flex 2” x 12” Male-Male Swivel Braided Flex 2” x 18” Male-Male Swivel Braided Flex |
 |
| NJTUVG01 NJTUVG02 NJACVG01 |
Tuscon Valve Gasket Nebar Large Hole Tuscon Valve Gasket Nebar Small Hole ACV Gasket Nebar |
 |
| HFTRCF01 | 1.5” Triangular Flange Tapped |  |
| SLTIES01 SLTIES02 |
KCT 300 Cable Ties 12” Long KCT 540 Cable Ties 21” Long |
 |
| CTHELD01 CTHELD02 |
250ML Tin Heldite 500ML Tin Heldite |
 |
| CTLITH01 CTLITH02 CTGLYC01 |
1 Kilo Container Litharge 5 Kilo Container Litharge 500G Container Glycerine |
 |
| CTEWH01 CTOOO01 CTINSU01 |
Red and White Barrier Tape Out of Order Tape Insulation Tape |
 |
| CTPTFE01 CTPTFE02 CTPTFE03 |
Roll PTFE Tape Roll PTFE Core 4.0mm Roll PTFE Core 2.5mm |
 |
| GHGFUR01 GHGRED01 GHGRIG01 GHGVIN01 |
Furniture Hide Gloves Red PVC Gloves Rigger Gloves Vinyl Disposable Gloves Large |
 |
| CTFOAM01 CTSILI01 MTSGUN01 CTWD4001 |
500ML Expanding Foam Filler 315ML Tube Silicone Sealant Silicone Sealant Gun 400ML Tin WD40 Oil |
 |
| CTWAFP01 | 100G Water Finding Paste |  |
| CTTUFA01 CTTUFA02 |
500G Tin Tufenega 4.5 Kilo Tin Tufenega |
 |
| SLGRLA01 | Shell Style Grade Label (4” Bracket) |  |
| SLSHEL05 | Shell Style Grade Label c/w OPD Tile (4” Bracket) |  |
| SLGRLA02 | BP Style Grade Label (4” Bracket) |  |
| SLGRLA04 | Esso Style Grade Label (4” Bracket) |  |
| SLESSO02 | New Cerise Style Colour Grade Tiles now available for Grade Labels |  |
| SLPUMP02 | Nozzle Out of Order Sign (clips securely to nozzle) |  |
| SLCAUT01 | Caution Sign (No Bracket) |  |
| SLCAUT02 | Caution Sign (3” Bracket) |  |
| SLCAUT05 | Caution 2 Compartment Sign (3” Bracket) |  |
| SLWARN01 | Warning Tanks Manifolded Sign (2” Bracket) |  |
| SLWARN02 | Warning Connect Vapour Recovery Sign (3” Bracket) |  |
| SLVAP02 | Vapour Hook Up Sign (3” Bracket) |  |
| SLVAP01 | Stage Two Vapour Recovery Sign (3” Bracket) |  |
| SLBEW01 | Beware Vents Manifolded Sign (2” Bracket) |  |
| SLNOSM01 | Multi-Coloured No Smoking Sign (No Bracket) |  |
| SLNOSM02 | Multi-Coloured No Smoking Sign (2” Bracket-Vents) | |
| SLNOSM03 | Large Various multi-coloured Warning Sign |  |
| SLDOGT01 | Dog Tags c/w Key Ring |  |
| SLBRRT01 | Brass Riser Tags |  |
| SLVENT01 | Vent Sign (2” Jubillee Clip) |  |
| SLTANK01 | Tank Sign (2” Jubilee Clip) |  |
| SLPUMP01 | Pump Sign (2” Jubilee Clips) |  |
| SLTTPL01 | Tank to Pump Sign (2” Jubilee Clips) |  |
| SLTPGL01 | Tank to Pump Sign inc Grade (2” Jubilee Clip) |  |
| FS7 | Handle to operate raised covers |  |
| FS7A | Handle to operate flat covers |  |
PLEASE NOTE:
- Different size brackets are available upon request
- All signs manufactured with jubilee clips attached are also available with channel brackets. These can then be used with cable ties if preferred
- If there are any forecourt signs not listed that you require, then please contact our sales office, as we are confident we can assist.
